Reverse Osmosis Membrane Element

Reverse Osmosis Membrane Element

RO water can be produced efficiently with thin film membranes, operating at mains water pressure and sustaining quality despite high levels of salts (TDS). Premium osmosis membrane sheets are used to achieve an Stabilised rejection rate of 96%.

Elements contain preservative solution, therefore the permeate from the first hour of operation should be discarded, to flush the protective solution in the elements.

Pure water flow and salt rejection of RO membranes are dependant on factors including source water temperature and pressure. Our osmosis membrane specification was produced by experts carrying out in house testing at optimum conditions of 25°C and 70psi. If the operating conditions are not followed appropriately, we can not honour the warranty of the element as you will be unnecessarily reducing its service life.

General Product Specifications:

• Efficiently Works at Mains Pressure, Requiring No Pump or Electrical Components
• NSF/ANSI Standard 58 Certificated for Safety of Materials Used in Contact with Drinking Water – Food Grade and BPA Free
• Air Tight Seal Prolongs Shelf Life and Sustains Quality
• Industry Standard Sizing Allows Universal Compatibility
• Stabilised Rejection Rate – 96%
• Maximum Recommended Recovery – 33%
• Operating Pressure bar (psi) – 3 – 6 (43 – 87)
• Operating Temperature °C (°F) – 5 – 45 (41 – 113)
• Feed Flow Rate lpm – 1.9 – 9.1
• Free Chlorine Tolerance ppm – <0.1
• PH Range – 3 – 10
• PH Range (Chemical Cleaning) – 2 – 11
• Maximum Feed Silt Density Index SDI – 5
• Maximum Feedwater Turbidity NTU – < 1
• Recommended Shelf Life – 2 Years
• Dimensions mm – L 298 x OD 44.5

75GPD Specifications

• Pure Flow Rate – gpd (lph) –75 (11.8)
• Active Area ft (m) – 1.24 (0.38)
• Dimensions mm – L 298 x OD 44.5

100GPD Specifications

• Pure Flow Rate – gpd (lph) – 100 (15.8)
• Active Area ft (m) – 1.78 (0.54)
• Dimensions mm – L 298 x OD 48.2

150GPD Specifications

• Pure Flow Rate – gpd (lph) – 200 (31.5)
• Active Area ft (m) – 1.78 (0.54)
• Dimensions mm – L 298 x OD 48.2

200GPD Specifications

• Pure Flow Rate – gpd (lph) –75 (11.8)
• Active Area ft (m) – 4.13 (1.26)
• Dimensions mm – L 298 x OD 72